192.168.1.128

192.168.1.128:

The default IP address 192.168.1.128 allows you to adjust various settings, such as your WiFi password, SSID, and other router configurations. Here’s a step-by-step guide on how to do it:

Step 1: Logging In

1. Open your web browser.
2. In the address bar, type 192.168.1.128.

Step 2: Login Credentials

1. You’ll be prompted to enter your login credentials.
2. For your Username and Password, consult the sticker on the back of your router/modem. If this information is not available on the sticker, refer to the instruction manual provided with your router.

Once logged in, you’ll gain access to the router interface.

Modifying Your WiFi Password and Network Name (SSID):

Below are the steps for changing these settings for ZTE, TP-Link, and Tenda routers:

For ZTE:

1. Access your router’s interface via your web browser.
2. Navigate to “Network” > “WLAN” > “SSID Settings.”
3. In the “SSID Name” field, enter your preferred Network Name and click “Submit.”
4. Under “WLAN options,” select “Security.”
5. In the “WPA Passphrase” field, input your new WiFi Password.
6. Click “Submit” to apply the changes.

For TP-Link:

1. Log in to your router settings.
2. Go to “Wireless” > “Wireless Setting.”
3. Enter your Network Name (SSID) and Password, then click “Save.” (For some TP-Link router models, you may find the SSID and Password settings under “Basic Settings” and “Wireless Security Settings,” respectively.)

For Tenda:

1. Access the Tenda router interface and enter your Login Password.
2. Go to “Wi-Fi Settings” > “Wi-Fi Name & Password.”
3. In the “Wi-Fi Name” field, enter your Network Name.
4. Select “WPA/WPA2-PSK” as the Encryption Mode.
5. In the “Wi-Fi Password” field, enter your new WiFi Password.
6. Click the “Save” button to confirm the changes. (For some Tenda routers, you can go to the “Wireless” section on the homepage to input your Network Name (SSID) and password in the “WPA Pre-Shared Key” field.)

By following these steps, you can efficiently configure your ZTE, TP-Link, or Tenda router settings at 192.168.1.128.