10.1.1.1

10.1.1.1 is a private IP address that offers access to a wide array of router and modem settings, allowing you to change your WiFi password, Network Name (SSID), and other default configurations. Here’s a step-by-step guide on how to get started:

Step 1: Logging In

1. Open your web browser.
2. In the address bar, type 10.1.1.1.

Step 2: Default Login Credentials

1. You’ll be prompted to provide login credentials.
2. Look for the default Username and Password on a label located on the back or side of your router or modem.

Step 3: Accessing the Router Interface

Upon successful login, you will gain access to the router interface.

Note: Default Username and Passwords for 10.1.1.1

• iiNet
  • Username: admin
  • Password: admin
• Optus
  • Username: admin
  • Password: password
• D-Link
  • Username: admin
  • Password: admin
• Belkin
  • Username: admin
  • Password: admin

Encountering Login Issues:

If you face challenges while trying to access the 10.1.1.1 IP address, consider the following:

• Ensure that you are connected to the Wi-Fi network before attempting to open the router IP address/gateway.
• Make an effort to locate the correct IP address for your specific router or modem. Different router brands and models are configured with varying IP addresses. You can refer to a list of Default IP Addresses and Passwords for assistance.

Factory Reset Procedure:

If you’ve forgotten the username or password, you can try performing a factory reset, which will erase all manual configurations on your router. After the reset, you can log in using the default login credentials. Here’s how to do it:

1. Find the small “Reset” button on the underside of your router.
2. Press and hold the “Reset” button for 10-15 seconds until the LED lights start to blink.

By following these steps, you can efficiently configure your router and modem settings using 10.1.1.1, including changing your WiFi password and Network Name (SSID).